How to Remove Deep Scratches From Flat Screen TV?

How to Remove Deep Scratches From Flat Screen TV?

Here are the 8 best DIY methods to get rid of deep scratches from flat screen TV. Along with this step-by-step guide, we have added the list of required tools. All of these methods are proven, and people are using them at their homes.

How to Remove Deep Scratches from Flat Screen TV? In general, you can remove deep scratches from flat-screen TV by using isopropyl alcohol, scratch remover kit, toothpaste, magical erasers, baking soda, and with the same color paint.

Flat television screens are sensitive and can get irreversible scratches. Therefore, you should use proper knowledge and common sense while attempting the ways of removing deep scratches.

How to Remove Deep Scratches from Flat Screen TV?

There is no need to send the televisions to the companies for cleaning. You do not need expertise before tying methods. Follow this step-by-step guide:

Use Isopropyl Alcohol

To begin this procedure, you need proper tools and the right knowledge of the process. First of all, get a bottle of isopropyl alcohol. You can purchase this from any drug or medical store. Alcohol can damage your TV in the worst manner.

The next important thing is the use of microfiber cloth. It must be the same cloth which many companies use for the cleaning of their client’s televisions. There must not be any fiber or dirt on the fabric.

At first, the material should be adequately dry. These are available at marts and in the market specially designed for cleaning. Do not use any other cloth; otherwise, it can leave fibers.

Moreover, you need distilled water, which you can purchase from the market. This is also available at the grocery stores. You should not use tap water because it has chemicals that can harm the surface.

Make sure that the gadget is unplugged from the current source. It provides power, and it can catch up with the heat.

The reaction of isopropyl alcohol and heat can result in disaster. Therefore, before beginning the procedure, make sure that no other electrical appliance is placed near this.

For dilution of isopropyl alcohol, you may require distilled water. Prepare a solution of fifty-fifty percent.

Take a bowl; add fifty percent of alcohol and fifty percent of distilled water. Shake the bowl slowly and carefully to mix both liquids.

Take a fiber-free cloth, and it should not be abrasive. Dampen this in the bowl of alcohol and distilled water solution.

Make sure the fabric does not contain too much liquid. Then, start rubbing the fiber-free cloth over the scratches.

If you find that the cracks are more significant than the scratches, fill them with some jelly material.

It should be in a circular motion until the scratch disappears or make it invisible as much as you can.

Always use fabric for the application of liquid; the direct application can affect picture quality, and your TV screen can be black and you can hear the sound.

This mixture of alcohol and distilled water is specially designated for light-emitting diode screens. For this purpose, you can use twenty parts of distilled water in a container and add one part of alcohol.

The alcohol should be rubbing alcohol, and its dilution is necessary. You can rub this mixture with the help of a lint-free cloth. Move the fabric in a circular motion and avoid the penetration of liquid into the other parts.

The moisture of the solution can harm the functioning of the light-emitting diodes. Although you can put the gadget on the carpet when doing the procedure, you can also place a soundbar on the carpet.

Use Scratch remover kit

A scratch remover kit combines multiple removing items that are effective and economical. 

The kits have a repairing pen, which has a fantastic efficiency of clearing them. There are some polishing pads inside the kids. The polishing effect hides the cuts completely. Check the depth; it defines the process for removing.

The spot appears white, and it is prominent. Fill the line with it and try to cover as much as possible.

Use reducing scratch pen in this step; shake the pen well before using. Use this pen for a clear coat; you should not create any line in the surrounding of the cut.

You can use the sanding pads for better results, press them on the edges, and put a slight amount of pressure.

Apply pen for at least one minute, and then buff the area gently. Buffing results in shining on the surface.

If you have a light-emitting diode display, then you can use a special kit on it. Scratches of light-emitting gadgets penetrate down the surface. The soft cloth and polishing cream inside the kit are useful.

You can read the reviews of a removal kit. It can help you to buy a better quality kit for your LED.

Manuals inside the boxes of these light-emitting diode displays also provide knowledge about the selection.

Use Toothpaste

The procedure is so simple, and you can do this at home. Using toothpaste on your television is a good idea. The paste should not be in liquid form; it should be semi-solid.

Toothpaste works amazingly on all types of filters, especially on the damaged areas of metal and plastic surfaces. You can apply toothpaste to a bristle-free brush. Rub the brush gently.

You can use any toothpaste for plasma televisions. Apply a small quantity of Colgate paste on a cotton bud; rub it for a few minutes. 

Magical erasers

The erasers are simple pencil, rubber stuff, but they help reduce the scratches from the surface.

Firstly apply water and alcohol solutions. Do the rubbing gently and in a circular motion. Use a standard pencil’s rubber; the eraser must be soft; otherwise, it can lead to mire lines.

You can also add the auto rubbing stuff; follow the same process as above for this type of removal.

Clean the surface with a soft cloth. It must be non-abrasive; otherwise, it can damage the image quality.

You can also use a piece of standard eraser for LED displays. Do not go harsh while rubbing it because it creates lines on the surface. You can use wireless headphones with the soundbar for a better experience.

Use Petroleum jelly

This method requires specific tools. These are petroleum jelly, cloth which should be fiber-free, and water. Distilled water is the right choice as compared to regular tap water.

Cleaning can make the scratches more visible, and you have to hide them properly. Then dampen a cloth with distilled water. 

Allow the surface to dry for some time. Now take one tablespoon of petroleum jelly. You can vary its amount according to your need.

Use a stick or your finger to apply petroleum jelly, fill all of these areas appropriately. Then, use a lint-free and clean cloth, wipe all the excessive petroleum jelly.

If you have a light crystal display, it is harder to find a kit for your model. However, you can use home remedies like the application of petroleum jelly on such products.

You can follow the same process as above; wipe with a wet cloth. Allow it to dry for some time; otherwise, the application becomes impossible.

Fill with a small amount of petroleum jelly using a non-fibrous cotton bud. Get rid of excessive amounts from the sides; clean it with a dry cloth.

Apply Car Wax

Car waxes and creams are very useful. These products work best on metal surfaces. Some are available in spray bottles. They are in semi-solid forms and are easily applicable. Just fill it, tap the surface with a fiber-free cloth, and rub it gently.

Move the fabric in a circular motion. This way is one of the easiest and effective ways. Ready-made scratch removers make the whole process less time-consuming.

Use baking soda

Take two-part of baking soda in a bowl and then add one part of distilled water to it. Mix both of them thoroughly and turn them into a paste.

Apply it for a minute; otherwise, the moisture of the mixture can damage the picture quality.

Same color polish

The color should be the same as your TV. Apply the polish like you apply paint. Fill the cuts and lines with this thick polish. Allow the polish to dry; this makes your gadget shiny and clean.